As one of the core components of the equipment, the guide rail and linear shaft are used to guide and support. In order to ensure high machining accuracy of the machine, its guide rail and straight line are required to have high guiding accuracy and good motion stability. During the operation of the equipment, a large amount of corrosive dust and smoke will be produced during the processing of the processed parts. These smoke and dust will be deposited on the surface of the guide rail and the linear shaft for a long time, which will have a great impact on the processing accuracy of the equipment, and will form corrosion spots on the surface of the guide rail and the linear shaft, thus shortening the service life of the equipment. In order to ensure the normal and stable operation of the machine and the processing quality of the products, the daily maintenance of the guide rail and the linear shaft should be carefully done.

注意：清潔導軌請準備——干棉布、潤滑油。雕刻機的導軌分為直線導軌、滾輪導軌。直線導軌的清潔：把激光頭移動到右側(或左側)，找到直線導軌，用干棉布擦拭直到光亮無塵，再加上少許潤滑油(可采用縫紉機油，切勿使用機油)，將激光頭左右慢慢推動幾次，讓潤滑油均勻分布即可。

Note: please prepare dry cotton cloth and lubricating oil for cleaning the guide rail. The guide rail of the engraving machine is divided into linear guide rail and roller guide rail. Cleaning of linear guide: first move the laser head to the right (or left), find the linear guide, wipe it with dry cotton cloth until it is bright and dust-free, add a little lubricating oil (sewing machine oil can be used, do not use engine oil), and slowly push the laser head to the left and right for several times, so that the lubricating oil can be evenly distributed.

滾輪導軌的清潔：把橫梁移動到內側，打開機器兩側端蓋，找到導軌，用干棉布把兩側導軌與滾輪接觸的地方擦拭干凈，再移動橫梁，把剩余地方清潔干凈。

Cleaning of roller guide rail: move the beam to the inside, open the end covers on both sides of the machine, find the guide rail, wipe the place where the guide rail on both sides contacts the roller with dry cotton cloth, and then move the beam to clean the rest.

以上就是為大家介紹的有關導軌絲杠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.pet998.com

The above is the detailed introduction of the guide rail lead screw. I hope it will help you. If you have any questions, please contact us. We will provide you with services in a professional manner http://m.pet998.com